PRODUCTS
-
Hydraulic Sealing Elements
- SSE
- SSE/C
- SSA
- SSB
- SSN
- SSB-1
- SSG
- SSJ
- SSD
- SSM-1
- SSG-2
- SSO
- SSP
- SSQ
- SSD-3
Hydraulic Rod Sealing Elements
-
Pneumatic Sealing Elements
-
Guiding Elements
-
Static Sealing Elements
-
Special Sealing Elements
-
SealXpress Tailor-Made Machined Seals
SPG-1S
| SEALX NO | D(H9) | d(h9) | B(-0/+0.2) | r | n |
| SPG-1S-050 | 50 | 39 | 4.2 | 1 | 6 |
| SPG-1S-060 | 60 | 44.5 | 6.3 | 1.3 | 8 |
| SPG-1S-063 | 63 | 47,5 | 6,3 | 1,3 | 8 |
| SPG-1S-075 | 75 | 54 | 8,1 | 1,8 | 10,5 |
| SPG-1S-080 | 80 | 64,5 | 6,3 | 1,3 | 6 |
| SPG-1S-085 | 85 | 69,5 | 6,3 | 1,3 | 6 |
| SPG-1S-090 | 90 | 74,5 | 6,3 | 1,3 | 6 |
| SPG-1S-090/1 | 90 | 69 | 8.1 | 1.8 | 10.5 |
| SPG-1S-095 | 95 | 74 | 8,1 | 1,8 | 10,5 |
| SPG-1S-100 | 100 | 84,5 | 6,3 | 1,3 | 6 |
| SPG-1S-100/1 | 100 | 79 | 8.1 | 1.8 | 10.5 |
| SPG-1S-105 | 105 | 84 | 8,1 | 1,8 | 10,5 |
| SPG-1S-105/1 | 105 | 89,5 | 6,3 | 1,3 | 6 |
| SPG-1S-110 | 110 | 94,5 | 6,3 | 1,3 | 6 |
| SPG-1S-115 | 115 | 94 | 8,1 | 1,8 | 10,5 |
| SPG-1S-120 | 120 | 99 | 8,1 | 1,8 | 10,5 |
| SPG-1S-125 | 125 | 104 | 8,1 | 1,8 | 10,5 |
| SPG-1S-125/1 | 125 | 110 | 6,3 | 1,3 | 10,5 |
| SPG-1S-130 | 130 | 109 | 8,1 | 1,8 | 10,5 |
| SPG-1S-135 | 135 | 114 | 8,1 | 1,8 | 10,5 |
| SPG-1S-140 | 140 | 119 | 8,1 | 1,8 | 10,5 |
| SPG-1S-145 | 145 | 124 | 8,1 | 1,8 | 10,5 |
| SPG-1S-150 | 150 | 129 | 8,1 | 1,8 | 10,5 |
| SPG-1S-160 | 160 | 139 | 8,1 | 1,8 | 10,5 |
| SPG-1S-165 | 165 | 144 | 8,1 | 1,8 | 10,5 |
| SPG-1S-170 | 170 | 149 | 8,1 | 1,8 | 10,5 |
| SPG-1S-175 | 175 | 154 | 8,1 | 1,8 | 10,5 |
| SPG-1S-180 | 180 | 159 | 8,1 | 1,8 | 10,5 |
| SPG-1S-185 | 185 | 164 | 8,1 | 1,8 | 10,5 |
| SPG-1S-190 | 190 | 169 | 8,1 | 1,8 | 10,5 |
| SPG-1S-200 | 200 | 179 | 8,1 | 1,8 | 10,5 |
| SPG-1S-210 | 210 | 189 | 8,1 | 1,8 | 10,5 |
| SPG-1S-215 | 215 | 194 | 8,1 | 1,8 | 10,5 |
| SPG-1S-220 | 220 | 199 | 8,1 | 1,8 | 10,5 |
| SPG-1S-225 | 225 | 204 | 8,1 | 1,8 | 10,5 |
| SPG-1S-230 | 230 | 209 | 8,1 | 1,8 | 10,5 |
| SPG-1S-250 | 250 | 229 | 8,1 | 1,8 | 10,5 |
SPG-1S is a two piece double acting piston seal consisting of a thermoplastic sealing element and one energizer elastomer ring.
PRODUCT ADVANTAGES
- Excellent sealing performance under static and dynamic applications
- Simple groove design
- Easy fit without installation tool
- Superior sealing performance at high and variable pressure levels
- Longer service life due to high abrasion resistance
- Excellent sealing at high surface roughness
- Outstanding resistance to pressure shocks
APPLICATION
Heavy duty cylinders and construction machinery.
| MATERIAL | |
| NBR | 70 SHORE A |
| PA | |
| OPERATING CONDITIONS | |||
| MEDIA | Mineral oils(DIN 51524) | HFA and HFB | HFC |
| TEMPERATURE | -30°C +105°C | +5°C +60°C | -30°C +60°C |
| PRESSURE | ≤500 Bar | ≤500 Bar | ≤500 Bar |
| SPEED | ≤1 m/sn | ≤1 m/sn | ≤1 m/sn |
Note: The above data are maximum values and connot be used at the same time.
| SURFACE ROUGHNESS | Ra | Rmax |
| Çalışan Yüzey ØD | ≤0.4 μm | ≤4.0 μm |
| Kanal Dibi Ød | ≤1.6 μm | ≤6.3 μm |
| Kanal Yan Yüzü B | ≤3.2 μm | ≤16 μm |
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
INSTALLATION
Easy installation into one-piece piston head. Sealing elements must be pre-lubed with system oil before installation.
NOTES It is recommended to use with minimum two piston guide rings in long-stroke cylinders , minimum one guide ring in short stroke and under low radial loads.
| PERMISSIBLE SEALING GAP | |
| B (mm) | Smax (mm) |
| 4.2 | 0.35 |
| 6.3 | 0.50 |
| 8 | 0.60 |
Note: All the above mentioned “S” values are maximum and it’s vital to use lower values for system security.