PRODUCTS
-
Hydraulic Sealing Elements
- SSE
- SSE/C
- SSA
- SSB
- SSN
- SSB-1
- SSG
- SSJ
- SSD
- SSM-1
- SSG-2
- SSO
- SSP
- SSQ
- SSD-3
Hydraulic Rod Sealing Elements
-
Pneumatic Sealing Elements
-
Guiding Elements
-
Static Sealing Elements
-
Special Sealing Elements
-
SealXpress Tailor-Made Machined Seals
SSU
| SEALX NO | d | D(-0/+0.2) | H(±0.05) | B(±0.5) | b |
| SSU-017 | 17 | 25.4 | 2.85 | 4.2 | 3.5 |
| SSU-023.40 | 23.4 | 31.8 | 2.85 | 4.2 | 3.5 |
| SSU-031.30 | 31.3 | 39.7 | 2.85 | 4.2 | 3.5 |
| SSU-036.10 | 36.1 | 44.5 | 2.85 | 4.2 | 3.5 |
| SSU-045.40 | 45.4 | 53.8 | 2.85 | 4.2 | 3.5 |
| SSU-055 | 55 | 63.4 | 2.85 | 4.2 | 3.5 |
SSU is a flange seal profile specially designed for static sealing of SAE flanges.
PRODUCT ADVANTAGES
- Able to work in high pressures
- Interchangeable for o-ring
- Functions even with poor surfaces
- Easy and secure installation
- High wear resistance
- High reliability
APPLICATION
Used in SAE type of flanges and valve blocks.
| MATERIAL | |
| PU | 95 SHORE A |
| OPERATING CONDITIONS | |||
| MEDIA | Mineral oils (DIN 51524) | HFA ve HFB | HFC |
| TEMPERATURE | -30°C +100°C | +5°C +50°C | -30°C +40°C |
| PRESSURE | ≤600 N/mm2 | ≤600 N/mm2 | ≤600 N/mm2 |
Note: The above data are maximum values and cannot be used at the same time.
| SURFACE ROUGHNESS | Ra | Rmax |
| Sliding Surface | ≤0.4 μm | ≤6.3 μm |
| Groove Surface | ≤3.0 μm | ≤25 μm |
INSTALLATION
Easily assembled by hand. The surface of the flanges should be dried prior to installation. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.