PRODUCTS
-
Hydraulic Sealing Elements
- SSE
- SSE/C
- SSA
- SSB
- SSN
- SSB-1
- SSG
- SSJ
- SSD
- SSM-1
- SSG-2
- SSO
- SSP
- SSQ
- SSD-3
Hydraulic Rod Sealing Elements
-
Pneumatic Sealing Elements
-
Guiding Elements
-
Static Sealing Elements
-
Special Sealing Elements
-
SealXpress Tailor-Made Machined Seals
SSV
| SEALX NO | D(H8) | d(h9) | B (-0/+0,2) |
| SSV-018 | 18 | 14 | 5,8 |
| SSV-022 | 22 | 19,1 | 3,5 |
| SSV-025 | 25 | 22,1 | 3,5 |
| SSV-030 | 30 | 25,5 | 4,5 |
| SSV-035 | 35 | 30,5 | 4,5 |
| SSV-040 | 40 | 35,2 | 5,4 |
| SSV-044 | 44 | 39,5 | 4,5 |
| SSV-050 | 50 | 45,4 | 5,4 |
| SSV-050/1 | 50 | 44,6 | 6,2 |
| SSV-054 | 54 | 49,5 | 4,5 |
| SSV-058 | 58 | 53,4 | 3,9 |
| SSV-068 | 68 | 63,5 | 4,5 |
| SSV-070 | 70 | 64,6 | 6,2 |
| SSV-075 | 75 | 69,6 | 6,2 |
| SSV-085 | 85 | 81,5 | 4,5 |
| SSV-086 | 86 | 81,5 | 4,5 |
| SSV-100 | 100 | 94,4 | 5,3 |
| SSV-200 | 200 | 191,6 | 8,5 |
SSV is a double acting cover seal specially designed for staticapplications.
PRODUCT ADVANTAGES
- High operating pressures
- Interchangeable for o-ring and o-ring with back-up ring
- Easy and secure installation
- No need for additional back-up ring
- High wear resistance
APPLICATION
All the hydraulic applications that o-rings are being used.
| MATERIAL | |
| PU | 94 SHORE A |
| OPERATING CONDITIONS | |||
| MEDIA | Mineral oils (DIN 51524) | HFA ve HFB | HFC |
| TEMPERATURE | -30°C +100°C | +5°C +50°C | -30°C +40°C |
| PRESSURE | ≤500 N/mm2 | ≤500 N/mm2 | ≤500 N/mm2 |
Note: The above data are maximum values and cannot be used at the same time.
| SURFACE ROUGHNESS | Ra | Rmax |
| Sliding Surface Ød | ≤0.8 μm | ≤3.2 μm |
| Groove Base ØD | ≤1.6 μm | ≤6.3 μm |
| Groove Flanks B | ≤6.3 μm | ≤16 μm |
INSTALLATION
Easily assembled by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
NOTES
SSV is a double acting cover seal for outer sealing. The diffculties faced during an o-ring assembly such as twisting , ripping was solved with this design. It can be used without a back-up ring at high pressures. Due to the material , SSV does have good wear resistance to extrusion and shows good sealing performance in double acting applications.