PRODUCTS
-
Hydraulic Sealing Elements
- SSE
- SSE/C
- SSA
- SSB
- SSN
- SSB-1
- SSG
- SSJ
- SSD
- SSM-1
- SSG-2
- SSO
- SSP
- SSQ
- SSD-3
Hydraulic Rod Sealing Elements
-
Pneumatic Sealing Elements
-
Guiding Elements
-
Static Sealing Elements
-
Special Sealing Elements
-
SealXpress Tailor-Made Machined Seals
SAP
| SEALX NO | NBR | PU | d (h10) | D (H11) | D1 (H11) | D2 (H11) | d1 (f8) | b1 | b2 | B (±0,1) | B1(±0,2) |
| SAP-008 | NBR | 8 | 11,6 | 8,5 | 10 | 4 | 3,5 | 2,8 | 3,3 | 5,3 | |
| SAP-009 | NBR | 9 | 14 | 9,5 | 11 | 5 | 5 | 4,1 | 4,8 | 6,8 | |
| SAP-009.5 | NBR | 9,5 | 15 | 10 | 12 | 5,5 | 4,6 | 3,7 | 4,5 | 6,5 | |
| SAP-012 | NBR | PU | 12 | 18 | 13 | 15,5 | 8 | 5 | 4,1 | 4,8 | 6,8 |
| SAP-012/1 | NBR | PU | 12 | 20 | 13 | 17 | 8 | 7,8 | 6,2 | 7 | 9 |
| SAP-014 | NBR | PU | 14 | 22 | 15 | 19 | 10 | 7,8 | 6,2 | 7 | 9 |
| SAP-016 | NBR | PU | 16 | 24 | 17 | 21 | 12 | 7,8 | 6,2 | 7 | 9 |
| SAP-016/1 | NBR | PU | 16 | 22 | 17 | 19,5 | 12 | 5,5 | 4,7 | 5,2 | 7,2 |
| SAP-018 | PU | 18 | 26 | 19 | 22 | 14 | 7,8 | 6,2 | 7 | 9 | |
| SAP-020 | NBR | PU | 20 | 28 | 21 | 24 | 16 | 7,8 | 6,2 | 7 | 9 |
| SAP-022 | NBR | 22 | 30 | 23 | 26 | 18 | 7,8 | 6,2 | 7 | 9 | |
| SAP-024 | NBR | PU | 24 | 32 | 25 | 28 | 20 | 7,8 | 6,2 | 7 | 9 |
| SAP-025 | NBR | PU | 25 | 33 | 26 | 29 | 21 | 7,8 | 6,2 | 7 | 9 |
| SAP-025/1 | PU | 25 | 35 | 26 | 30 | 21 | 7,8 | 6,2 | 7 | 9 | |
| SAP-028 | PU | 28 | 36 | 29 | 32 | 24 | 7,8 | 6,2 | 7 | 9 | |
| SAP-030 | NBR | PU | 30 | 40 | 31,5 | 35 | 26 | 7,8 | 6,2 | 7 | 9 |
| SAP-032 | NBR | PU | 32 | 40 | 33,5 | 37 | 28 | 7,8 | 6,2 | 7 | 9 |
| SAP-032/1 | PU | 32 | 42 | 33 | 37 | 28 | 7.8 | 6.2 | 7 | 9 | |
| SAP-036 | NBR | PU | 36 | 46 | 37,5 | 41 | 32 | 7,8 | 6,2 | 7 | 9 |
| SAP-040 | NBR | PU | 40 | 50 | 41,5 | 45 | 32 | 7,8 | 6,2 | 7 | 9 |
| SAP-050 | PU | 50 | 67 | 53 | 58 | 46 | 11 | 11 | 12,5 | 14,5 | |
| SAP-050/1 | PU | 50 | 60 | 51,5 | 55 | 46 | 7,8 | 6,2 | 7 | 9 | |
| SAP-057 | PU | 57 | 74 | 60 | 65 | 53 | 11 | 10 | 12,5 | 14,5 | |
| SAP-070 | PU | 70 | 87 | 73 | 78 | 66 | 11 | 10 | 12,5 | 14,5 |
SAP is a pneumatic cushioning seal with special design spacer lug and flow passages to cushion at the end of the stoke in pneumatic cylinders.
PRODUCT ADVANTAGES
- Easy installation
- Reliable damping due to the flow passages and automatic centering
- Able to work in hard conditions
APPLICATION
Pneumatic cylinders.
| MATERIAL | |
| NBR | 90 SHORE A |
| PU | 92 SHORE A |
| OPERATING CONDITIONS | |
| NBR | |
| MEDIA | Prepared , dried and de-oiled compressed air |
| TEMPERATURE | -30°C +105 °C |
| PRESSURE | ≤12 Bar |
| SPEED | ≤ 1.0 m/sn |
| PU | |
| MEDIA | Prepared , dried and de-oiled compressed air |
| TEMPERATURE | -30°C +80 °C |
| PRESSURE | ≤16 Bar |
| SPEED | ≤ 1.0 m/sn |
Note: The above data are maximum values and cannot be used at the same time.
| SURFACE ROUGHNESS | Rmax |
| Sliding Surface Ød | ≤4 μm |
| Groove Base ØD | ≤10 μm |
| Groove Flanks B | ≤15 μm |
INSTALLATION
It can be assembled into closed groove by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
NOTES
For special applications that require high temperatures , SAP can be produced in FKM material.