PRODUCTS
-
Hydraulic Sealing Elements
- SSE
- SSE/C
- SSA
- SSB
- SSN
- SSB-1
- SSG
- SSJ
- SSD
- SSM-1
- SSG-2
- SSO
- SSP
- SSQ
- SSD-3
Hydraulic Rod Sealing Elements
-
Pneumatic Sealing Elements
-
Guiding Elements
-
Static Sealing Elements
-
Special Sealing Elements
-
SealXpress Tailor-Made Machined Seals
SPY-2
| SEALX NO | D (H11) | d (h11) | B (-0/+0,2) | d1(h11) | e |
| SPY-2-030 | 30 | 20 | 2,3 | 29.89 | 21.6 |
| SPY-2-035 | 35 | 22.5 | 3 | 34.88 | 24 |
| SPY-2-040 | 40 | 27.5 | 3 | 39.88 | 29 |
| SPY-2-060 | 60 | 44 | 3,5 | 59.86 | 45.5 |
| SPY-2-063 | 63 | 47 | 3,5 | 62.86 | 48.6 |
| SPY-2-070 | 70 | 55.5 | 3,5 | 69.85 | 57 |
| SPY-2-080 | 80 | 61 | 4,1 | 79.85 | 62.6 |
| SPY-2-090 | 90 | 71 | 4,1 | 89.83 | 72.6 |
| SPY-2-100 | 100 | 79 | 4,6 | 99.83 | 80.6 |
| SPY-2-125 | 125 | 101 | 5,1 | 124.8 | 102.6 |
| SPY-2-140 | 140 | 113.5 | 5,6 | 139.8 | 115 |
| SPY-2-160 | 160 | 131.5 | 6,2 | 159.79 | 133 |
| SPY-2-200 | 200 | 163 | 8,8 | 199.76 | 164.6 |
| SPY-2-355 | 355 | 313 | 10,8 | 354.64 | 314.6 |
SPY-2 is a double acting pneumatic piston seal designed to workin low axial housing heights.
PRODUCT ADVANTAGES
- Easy installation
- Low friction
- Superior sealing effect
APPLICATION
Short stroke pneumatic cylinders and valves.
| MATERIAL | |
| NBR | 70 SHORE A |
| OPERATING CONDITIONS | |
| MEDIA | Prepared , dried and de-oiled compressed air |
| TEMPERATURE | -30°C +105 °C |
| PRESSURE | ≤12 Bar |
| SPEED | ≤1.0 m/sn |
Note: The above data are maximum values and cannot be used at the same time.
| SURFACE ROUGHNESS | Rmax |
| Sliding Surface Ød | ≤4 μm |
| Groove Base Ød | ≤10 μm |
| Groove Flanks B | ≤15 μm |
INSTALLATION
SPY-2 can be snapped by hand into the housing grooves provided. In case of using an assembly tool make sure that it is of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. Special lubrication should be used on the sliding surface in case of having dried media.
NOTES
For special applications that require high temperatures , SPY-2 can be produced in FKM material.
At pressure range <1 bar vent hole is recommended; however single-acting sealing function is guaranteed at this condition.