PRODUCTS
-
Hydraulic Sealing Elements
- SSE
- SSE/C
- SSA
- SSB
- SSN
- SSB-1
- SSG
- SSJ
- SSD
- SSM-1
- SSG-2
- SSO
- SSP
- SSQ
- SSD-3
Hydraulic Rod Sealing Elements
-
Pneumatic Sealing Elements
-
Guiding Elements
-
Static Sealing Elements
-
Special Sealing Elements
-
SealXpress Tailor-Made Machined Seals
SAH-S
| SEALX NO | d(e9) | D(H10) | D1(H11) | B(+0.2/-0.0) | B1 | b |
| SAH-S-012 | 12 | 16,50 | 14,20 | 3,00 | 3,60 | 4 |
| SAH-S-016 | 16 | 20,50 | 18,20 | 3,00 | 3,60 | 4 |
| SAH-S-020 | 20 | 25,00 | 22,40 | 3,40 | 4,00 | 4,6 |
| SAH-S-025 | 25 | 30,00 | 27,40 | 3,40 | 4,00 | 4,6 |
| SAH-S-030 | 30 | 35,5 | 32,9 | 4 | 4,8 | 6 |
| SAH-S-04 | 4 | 8,10 | 6,70 | 3,00 | 3,80 | 4 |
| SAH-S-06 | 6 | 11,10 | 9,10 | 3,60 | 4,60 | 5 |
| SAH-S-08 | 8 | 14,10 | 12,10 | 3,60 | 4,60 | 5 |
| SAH-S-10 | 10 | 16,10 | 14,10 | 4,20 | 5,40 | 6 |
SAH-S is a single acting pneumatic rod seal ensuring that foreign particles are not introduced into the pneumatic cylinders. The lip is designed in a particular way that it functions as a rod seal and wiper.
PRODUCT ADVANTAGES
- Superior sealing effect
- Superior wiping effect
- Low dynamic friction
- Minimal space requirement
- Highly wear resistant
APPLICATION
Pneumatic cylinders.
| MATERIAL | |
| PU | 92 SHORE A |
| OPERATING CONDITIONS | |
| MEDIA | Prepared , dried and de-oiled compressed air |
| TEMPERATURE | -30°C +80°C |
| PRESSURE | ≤16 Bar |
| SPEED | ≤ 1.0 m/sn |
Note: The above data are maximum values and cannot be used at the same time.
| SURFACE ROUGHNESS | Rmax |
| Sliding Surface Ød | ≤4 μm |
| Groove Base ØD | ≤10 μm |
| Groove Flanks B | ≤15 μm |
INSTALLATION
It can be assembled into closed groove without any tools. SAH-S does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.